Closing the cord presser plate
6
Loosen the cables outside the
control box without stretching
them too much inside the
control box.
7
Close the cord presser plate
(1).
If the cord presser plate (1) is not closed firmly, dust will get inside the control box and may cause problems.
NOTE
8
Connect cords that match the
voltage specifications.
<EU specifications>
(1) Filter box
(2) Screws [4 pcs]
(3) Staples [3 pcs]
(4) Power cord
1. Attach an appropriate
switch and cable to the
power cord (4).
(The green and yellow wire
is the ground wire.)
2. Insert the power plug into a
properly-grounded electrical
outlet.
• Take care when tapping in the five
staples (3) to make sure that they
do not pierce the cords.
• Do not use extension cords,
otherwise machine operation
problems may result.
NOTE
1
Installation
11
