Brother RuggedJet RJ-4040 Software Manual Download Page 10

Page: 10 / 111

ESC/P Command Reference

- 4 -

1. Using ESC/P Commands

(4) Text operations

1. Specify the character set.

- Select font (ESC k)
- Select character code (ESC t)
- Select international character set (ESC R)
- Specify character size (ESC X)
- Specify the character spacing (ESC P, ESC M, ESC SP)

2. Specify the character style.

- Specify character style
(ESC 4, ESC 5, ESC E, ESC F, ESC G, ESC H, ESC W, SO,
ESC SO, SI, ESC SI, DC2, DC4, ESC -, ESC !)

3. Specify character codes.

Repeat 1–3 above as necessary.

(5) Image data

1. Specify bit images.

- (ESC *, ESC K, ESC L, ESC Y, ESC Z)

2. Specify barcodes.

- (ESC i B)

3. Specify 2D barcodes.

- (ESC i Q, ESC i V, ESC i D, ESC i M)

4. Print the downloaded data

- (ESC i F)
Downloaded image data must first be downloaded and saved on
the printer.

Summary of Contents for RuggedJet RJ-4040
















































































































Search results

Summary of Contents for RuggedJet RJ-4040

Reviews:

Brother RuggedJet RJ-4040, Software Manual, Page: 10 / 111

Search results

Summary of Contents for RuggedJet RJ-4040

Reviews: