Brother RH-9820, Service Manual

Page: 18 / 236

2. FUNCTION SETTINGS
9
RH-9820
Panel operation settings
No.
Setting
range
Setting items
Default
value
Disabling program mode
OFF Normal
350
ON
Switching to program mode is disabled.
Shortcut keys are also disabled.
OFF
Disabling cycle program mode
OFF Normal
351
ON Switching to cycle program mode is disabled.
OFF
Disabling changing of production counter
OFF Normal
352
ON Changing the production counter is disabled.
OFF
Disabling changing of sewing speed
OFF Normal
353
ON Changing the sewing speed (parameter No. 01) is disabled.
OFF
Disabling changing of program number
OFF Normal
354
ON
Changing the program number is disabled.
* However, the steps in cycle programs can be changed.
OFF
Disabling changing to cutting before sewing
OFF Normal
355
ON
Changing to cutting before sewing is disabled.
* If cutting before sewing is the current setting before this is changed, the setting will
change automatically to no cutting.
OFF
Disabling changing to cutting after sewing
OFF Normal
356
ON
Changing to cutting after sewing is disabled.
* If cutting after sewing is the current setting before this is changed, the setting will
change automatically to no cutting.
OFF
User program settings
No.
Setting
range
Setting items
Default
value
Maximum sewing speed (rpm)
450
1000 - 2500
A limit to the maximum sewing speed can be set.
Setting can be carried out in units of 100 rpm.
2500
Maximum number of cycle programs
451
0 - 9
The number of effective cycle programs can be set.
* If cycle programs are never used, it can be useful to set this to 0. 9
Production counter when using cycle programs
OFF The counter is updated each time a buttonhole is sewn.
452
ON The counter is updated each time a single cycle is completed.
OFF
Maximum cutting space (mm)
453
0.5 - 0.8
This sets the maximum value for the cutting space.
* If setting this to 0.8 mm, adjust so that the needle plate and the throat plate do not
interfere with each other. (Refer to “7-20. Adjusting the positions of the work clamp
plates”.)
0.5
Maximum straight bartack length (mm)
454
6 - 9
This sets the maximum straight bartack length.
* If setting this to 9 mm, adjust so that the needle plate and the throat plate do not
interfere with each other. (Refer to “7-20. Adjusting the positions of the work clamp
plates”.)
6
Additional zigzag width when no cutting is set (mm)
455
0 - 1.0
When sewing using no cutting, the value set here is added automatically to the zigzag
width.
Setting can be carried out in units of 0.1 mm.
0