Brother PR655, Operation Manual Addendum

Page: 15 / 76

14
ENGLIS
H
Selecting the Thread Color Information for “PES”
Format Data
You can display the thread color for “PES” format
data according to the machine setting, or setting
from the PE-DESIGN, PE-DESIGN Lite or PED-Basic
(embroidery editing software).
(Refer to “Changing the thread color information”
listed in the Operation Manual for the machine
setting of thread color.)
The “PES” Thread Code can be selected from page
1 of the settings screen.
ON: The thread color information will be displayed
according to the PE-DESIGN, PE-DESIGN Lite or
PED-Basic (embroidery editing software) settings.
OFF: The thread color information displayed will
be according to the machine setting.
When the machine is purchased, “ON” is selected.
Checking the Length of Time until the Machine’s Next
Stop
The length of time until the embroidery machine’s
next stop can be viewed in the embroidering
screen.
The machine stops when a spool change is
required, or when the machine is set to be stopped
by other settings. If the spool change indicator
appears, the machine will require a spool change.
When the time is indicated in red, this signals the
last color to be embroidered before the machine
stops.
1 Time until the machine stops
Note
●
The displayed information differs from that
described in the Operation Manual.
1