Brother PR655, Operation Manual Addendum

Page: 14 / 76

13
b
To open another pattern sent from the
computer, touch , and then repeat the
procedure starting from step
8
to continue
embroidering.
• To stop embroidering or to embroider the
same pattern again, touch .
Note
●
The embroidering screen settings specified
in step
0
are saved even if was
touched to continue sewing after
embroidering is finished.
Memo
●
If the embroidery machine is turned off
while it is embroidering, the resume
operation can be used the next time it is
turned on.
Disabling the Link function
1
Touch , and then touch or
to display page 5 of the machine settings
screen.
2
Touch to disable the Link function.
X
When the following message appears,
touch .
3
Turn off the machine.
.
Error messages in the
Link function
Machine cannot receive any data
from the PC in the Link mode.
Turn off the machine, and check
the USB connection. After
connecting the USB cord securely,
turn on the machine again.
Machine failed to communicate
with the PC in the Link mode.
Turn the machine off, and then turn
the machine on again.