Brother PJ-822, User Manual

Page: 155 / 199

Print Unit Settings
Print a report containing firmware version, paper size, and configuration information.
Factory Reset
(PJ-822/PJ-823) Reset all the settings to the factory settings, including device settings, and transferred
data.
(PJ-862/PJ-863/PJ-883) Reset all the settings to the factory settings, including device settings, transferred
data, and network settings.
Reset only Device Settings
Reset the settings that can be changed in the Device Settings to the factory settings.
Delete Template
Delete all the templates stored in the printer.
Option Settings
If the Do not display an error message if the current settings cannot be retrieved at startup checkbox
is selected, an error message is not displayed next time.
Basic Tab
Auto Power On
Specify how the printer responds when connected to a USB, an AC or DC power outlet.
Auto Power Off
Specify the amount of time that passes before the printer turns off automatically.
Auto Sleep
Specify the amount of time to pass before the printer automatically goes into sleep mode.
• The printer will automatically enter sleep mode when the specified time elapses under the following
conditions:
-
The printer does not receive data.
- In idle mode.
• Sleep mode is cancelled when the following operations are performed:
-
A printer button is pressed.
- The printer receives data.
- The USB cable is disconnected and then reconnected.
- The AC Adapter is disconnected and then reconnected.
- The Rechargeable Li-ion Battery is removed and then reinserted.
Hybrid Power Supply
Use the AC Adapter (PA-AD-600A) along with the Rechargeable Li-ion Battery (PA-BT-002) to increase the
printing speed.
Command Mode
Specify the printer’s command format.
Print Density
Adjusts the printer’s printing density.
Print Speed
Select the printer’s printing speed.
Option Description
1.1 ips / 27 mm/s Select these options when you want to prioritize image
quality.
151