Brother P300BT User Manual Download

Page: 15 / 17

- To turn the machine on, press the Power Button.
- To turn the machine off, press and hold the Power Button for 0.5 seconds.

Your machine's LED indicates your machine's status.

4. Turning Your Machine On or Off

5. LED Indications

LED

Condition

Steady green light

Your machine is connected via Bluetooth, or the tape is
feeding.

Flashing green light

If the green light is lit for 3 seconds, then off for 1 second,
your machine is powered on and ready.

Flashing green light

If the green light flashes at 0.5 second intervals, the unit
is receiving data from your mobile device.

Steady red light

Your machine is booting. (see “

7. Troubleshooting

”)

Flashing red light

If the red light flashes at 1 second intervals, one of the
following has occurred:
• No Tape Cassette installed
• Incorrect Tape Cassette installed
• Incompatible Tape Cassette installed
• Transmission error (see “

7. Troubleshooting

”)

• Cutter error
• Incompatible AC Adapter used

(see “

7. Troubleshooting

”)

Flashing red light

If the red light flashes at 0.5 second intervals, there is a
system error (see “

7. Troubleshooting

”).

Flashing orange light

If the orange light flashes at 1 second intervals, the
batteries are almost out of power.

Summary of Contents for P300BT


















Search results

Summary of Contents for P300BT

Reviews:

Related manuals for P300BT

Brands by name

Popular brands

Brother P300BT, User Manual

Search results

Summary of Contents for P300BT

Reviews:

Related manuals for P300BT

Brands by name

Popular brands