HELPFUL HINTS (continued)
You can reset the label maker when you want to
restore it to factory settings, or when it is not
working correctly. All text, settings and stored files
are cleared.
1
Turn off the label maker, press and hold
and
, and then press and hold
to turn the label maker back on.
2
First release the power button, and then
release
and
.
The label maker turns on with the internal
memory reset.
NOTE
Contact Information Website: www.brother.ca
Shortcuts
Language
Space key
Width
Label Length
Margin
File
Unit
LCD contrast
Resetting the label maker
6
CAUTION
Using a combination of different batteries (such as
Ni-MH and alkaline), may result in an explosion.
Dispose of used batteries according to the
instructions.
Battery Recommendations
• Remove the batteries if you do not intend to
use the label maker for an extended period of
time.
• Dispose of the batteries at an appropriate
collection point, not in the general waste
stream. In addition, be sure to observe all
applicable federal, state, and local
regulations.
• When storing or discarding the batteries, wrap
each battery (for example with cellophane
tape), to prevent it from short-circuiting. (See
the picture in the lower right)
(Battery insulation example)
1. Cellophane tape
2. Alkaline or Ni-MH
battery
Awesome support comes standard with us.
So if you ever consider returning this
product, contact us first at:
www.brother.ca/support
Live Chat
with us or reach us on
2
1
