manualshive.com logo in svg

Brother P-touch E110, User Manual, Page: 17 / 17

Share
Download
Brother P-touch E110 User Manual Download Page 17

What to do when

Problem

Solution

The display 
remains blank 
after you have 
turned on the 
P-touch 
labelling 
machine.

• Check that the batteries are 

correctly installed. See the 

Installing Power Supply and 
Tape Cassette

 section.

• The batteries may be weak. 

Replace them.

• Check that the AD-24ES 

Adapter is correctly connected.

When the 
label is 
printed, there 
is too much 
margin 
(space) on 
both sides 
of the text.

See the 

Setting Margins

 section 

in this guide and select [

Half

], 

[

Narrow

] or [

Chain Print

] 

to have smaller margins for your 
labels.

The P-touch 
labelling 
machine 
does not print, 
or the printed 
characters 
are not 
formed 
properly.

• Check that the cassette is 

inserted correctly.

• If the cassette is empty, 

replace it.

• Check that the Tape Cassette 

Cover is closed correctly.

The setting 
has cleared 
on its own.

• The batteries may be weak. 

Replace them.

• When power is disconnected for 

more than three minutes, all text 
and formats in the display 
settings are cleared.

A blank 
horizontal line 
appears 
through the 
printed tape.

There may be some dust on the 
Print Head. Remove the cassette 
and use a dry cotton swab to 
gently wipe the Print Head with 
an up-and-down motion. See the 

Installing Power Supply and 
Tape Cassette

 section for the 

Print Head location.

The P-touch 
labelling 
machine has 
“locked up” 
(nothing 
happens 
when a key 
is pressed, 
even though 
the P-touch 
labelling 
machine 
is on.)

For more information, see the 

Resetting the P-touch 
Labelling Machine

 section.

The power 
turns off when 
you try to 
print.

• The batteries may be weak. 

Replace them.

• Check that the batteries are 

correctly inserted.

• The wrong AC Adapter is used. 

We recommend using the 
AD-24ES Adapter.

The tape does 
not feed 
correctly or 
the tape gets 
stuck inside 
the P-touch 
labelling 
machine.

• Check that the end of the tape 

feeds under the tape guides. 
For more information, see the 

Installing Power Supply and 
Tape Cassette

 section.

• The Cutter Lever was pressed 

while printing. Do not touch 
the Cutter Lever during printing.

To change 
language 
setting.

For more information, see the 

Initial Settings

 section.

Problem

Solution

Summary of Contents for P-touch E110


















Reviews:

No comments