manualshive.com logo in svg

Brother MFC-J985W, Online User'S Manual, Page: 584 / 588

Share
Download
Brother MFC-J985W Online User'S Manual Download Page 584

wireless network devices regularly send wireless packets (referred to as beacons), which contain the SSID
information. When your wireless network device receives a beacon, you can identify the wireless network that is
close enough for the radio waves to reach your device.

Standard resolution

203 × 98 dpi (black and white). 203 × 196 dpi (color). It is used for regular sized text and the quickest
transmission.

Station ID

The stored information that appears on the top of faxed pages. It includes the sender’s name and fax number.

Status Monitor

The Status Monitor utility is a configurable utility to monitor the status of one or more devices, allowing you to get
immediate notification when there is a problem, for example, when the machine runs out of paper or jams.

Subnet Mask

A subnet mask allows you to identify which part of an IP address is used as the network address and which part
is used as the host address.
In the following example, the last segment of the IP address is known as the host address and the first three
segments are the network address.
Example: Computer 1 can talk to Computer 2
•

Computer 1
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0

•

Computer 2
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0

0 denotes that there is no limit to communication at this part of the address.

Super Fine resolution (B&W only)

203 × 392 dpi. Best for very small print and line art.

Switching Hub

A central device (hub) that has a switching function. This hub distributes packets to the specified destinations,
localizes network traffic, and can increase the communication bandwidth of the entire network. Although network
devices are interconnected using a hub in 10BASE-T, 100BASE-TX, and other networks, the effective bandwidth
will quickly become saturated due to the Ethernet communication method when the number of nodes increases.
Therefore, switching technology was developed to directly connect only the ports that are actually
communicating without sending data to other ports. A hub that incorporates this technology is called a switching
hub.

 Home > Glossary

578

Summary of Contents for MFC-J985W













































































































































































































































































































































































































































































































































































































Reviews:

No comments