Brother MFC-J985W Online User'S Manual Download Page 485

Page: 485 / 588

Home >

Routine Maintenance

Clean Your Brother Machine

> Clean the Outside of the Machine

Clean the Outside of the Machine

IMPORTANT

•

Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine will damage the outside
surface of the machine.

•

DO NOT use cleaning materials that contain ammonia.

•

DO NOT use isopropyl alcohol to remove dirt from the control panel. It may crack the panel.

1. If the paper support flap is open, close it, and then close the paper support.
2. Pull the paper tray (1) completely out of the machine.

3. Wipe the outside of the machine with a dry, lint-free cloth to remove dust.

4. Lift the output paper tray cover and remove anything that is stuck inside the paper tray.

5. Wipe the inside and the outside of the paper tray with a dry, lint-free cloth to remove dust.

6. Close the output paper tray cover and put the paper tray firmly back in the machine.

479

Summary of Contents for MFC-J985W












































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-J985W

Reviews:

Brother MFC-J985W, Online User'S Manual, Page: 485 / 588

Search results

Summary of Contents for MFC-J985W

Reviews: