Brother MFC-J985W Online User'S Manual Download Page 424

Page: 424 / 588

Error Message

Cause

Action

the power for several minutes and
reconnect it.
(The machine can be turned off
without losing faxes stored in the
memory. )
See

Related Information

Transfer

Your Faxes or Fax Journal Report

Unusable Device
Disconnect device
from front connector
& turn machine off &
then on

A broken device is connected to the USB
direct interface.

Unplug the device from the USB direct
interface, and then press

to turn the

machine off and then on again.

Unusable Device
Please disconnect USB
device.

A USB device or USB flash drive that is
not supported has been connected to the
USB direct interface.

Unplug the device from the USB direct
interface. Turn the machine off and then
on again.

Wrong Ink Cartridge

The ink cartridge model number is not
compatible with your machine.

Verify whether the cartridge model
number will work with your machine.
See

Related Information

Supply

Specifications

Wrong Ink Color

An ink cartridge has been installed in the
wrong position.

Check which ink cartridges are not
matched by color to their ink cartridge
positions and move them to their correct
positions.

Related Information

•

Troubleshooting

•

Transfer Your Faxes or Fax Journal Report

•

LCD Overview

•

Print the Network Configuration Report

•

Replace the Ink Cartridges

•

Supply Specifications

•

Change the Check Paper Size Setting

•

Telephone Line Interference/VoIP

•

Load Documents in the Automatic Document Feeder (ADF)

•

Document Jams

•

Turn off Distinctive Ring

•

Caller ID

•

Load Paper

•

Load Photo or Photo L Paper in Photo Bypass Tray

•

Load Paper in the Manual Feed Slot

•

Printer Jam or Paper Jam

•

Clean the Paper Pick-up Rollers

•

Turn Off Memory Receive

•

Print a Fax Stored in the Machine's Memory

•

Paper is Jammed Inside and in the Front of the Machine (Jam A Inside/Front)

•

Paper is Jammed in the Front of the Machine (Jam B Front)

•

Paper is Jammed in the Back of the Machine (Jam C Rear)

•

Change the Paper Size and Paper Type

•

Print Settings (Windows

)

418

Summary of Contents for MFC-J985W












































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-J985W

Reviews:

Brother MFC-J985W, Online User'S Manual, Page: 424 / 588

Search results

Summary of Contents for MFC-J985W

Reviews: