Brother MFC-J6510DW, User Manual

Page: 79 / 271

Chapter 6
48
Using a non-Brother cordless
external telephone
6
If your non-Brother cordless telephone is
connected to the EXT. jack of the machine
and you typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine so you can press
Hook to send the call to the cordless handset.
Using remote codes
6
Fax Receive Code
6
If you answer a fax call on an extension
telephone, you can tell your machine to
receive it by dialing the Fax Receive Code
l
5 1 . Wait for the chirping sounds and then
replace the handset. (See Easy Receive
on page 39.)
If you answer a fax call at the external
telephone connected to the EXT. jack of the
machine, you can make the machine receive
the fax by pressing
Black Start and choosing
Receive
.
Telephone Answer Code
6
If you receive a voice call and the machine is
in Fax/Tel mode, it will start to sound the F/T
(pseudo/double) ring after the initial Ring
Delay. If you pick up the call on an extension
telephone you can turn the F/T Ring off by
pressing
# 5 1 (make sure you press this
between the rings).
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at the external telephone
connected to the EXT. jack of the machine by
pressing
Hook .
Changing the remote codes
6
The preset Fax Receive Code is
l
5 1 . The
preset Telephone Answer Code is # 5 1 . If
you want to, you can replace them with your
own codes.
a
Press
MENU
.
b
Press
a
or
b
to display
Fax
.
c
Press
Fax
.
d
Press
a
or
b
to display
Setup Receive
.
e
Press
Setup Receive
.
f
Press
a
or
b
to display
Remote Codes
.
g
Press
Remote Codes
.
h
Press
On
(or
Off
).
i
Do one of the following.
 If you want to change the Fax
Receive Code, enter the new code.
Press
OK
. Go to step
j
.
 If you do not want to change the Fax
Receive Code, press
OK
. Go to
step
j
.
j
Do one of the following.
 If you want to change the Telephone
Answer Code, enter the new code.
Press
OK
. Go to step
k
.
 If you do not want to change the
Telephone Answer Code, press
OK
.
Go to step
k
.
k
Press Stop/Exit .
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another three-
digit code (such as
# # # and 9 9 9 ).
• Remote Codes might not work with some
telephone systems.