manualshive.com logo in svg

Brother MFC-J2330DW, User Manual, Page: 645 / 814

Share
Download
Brother MFC-J2330DW User Manual Download Page 645

 Home > 

Troubleshooting

 > 

Printer Jam or Paper Jam

 > Paper is Jammed in the Back of the Machine

Paper is Jammed in the Back of the Machine

If the LCD displays the following paper jam messages, follow these steps:
•

[Jam Rear]

, 

[Repeat Jam Rear]

•

[Jam MP Tray]

, 

[Repeat Jam MP Tray]

•

[Jam Manual Feed Slot]

, 

[Repeat Jam Manual Feed Slot]

•

[Jam Tray2]

, 

[Repeat Jam Tray2]

1. Unplug the machine from the electrical socket.
2. If the paper is loaded in the MP tray, remove the paper. (MFC-J2730DW/MFC-J5730DW/MFC-J5930DW)
3. Pull Tray #1 (1) completely out of the machine as shown by the arrow.

1

(MFC-J2730DW/MFC-J5730DW/MFC-J5930DW)
If your LCD error message was 

[Jam Tray2]

 or 

[Repeat Jam Tray2]

, also pull Tray #2 (2) completely

out of the machine as shown by the arrow.

2

When finished, continue with the next step.

4. If your LCD error message was 

[Jam Rear]

, 

[Repeat Jam Rear]

, 

[Jam Tray2]

 or 

[Repeat Jam

Tray2]

, do the following:

a. Open the Jam Clear Cover (1) at the back of the machine.

1

b. Slowly pull the jammed paper out of the machine.

638

Summary of Contents for MFC-J2330DW















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments