Brother MFC-J2330DW, User Manual, Page: 614 / 814

Error Message Cause Action
See Related Information : Load
Documents in the Automatic Document
Feeder (ADF)
.
See Related Information : Document
Jams .
High Temperature The room temperature is too high. After cooling the room, allow the machine
to cool down to room temperature. Try
again when the machine has cooled
down.
Hub is Unusable. A hub or USB flash drive with hub has
been connected to the USB direct
interface. Hubs, including a USB flash drive with a
built-in hub, are not supported. Unplug the
device from the USB direct interface.
Ink Absorber NearFull The ink absorber box or flushing box is
nearly full. The ink absorber box or flushing box must
be replaced soon. Contact Brother
customer service or your local Brother
dealer.
Ink Absorber Pad Full The ink absorber box or flushing box is
full. These components are periodic
maintenance items that may require
replacement after a period of time to
ensure optimum performance from your
Brother machine. Because these
components are periodic maintenance
items, the replacement is not covered
under the warranty. The need to replace
these items and the time period before
replacement is dependent on the number
of purges and flushes required to clean
the ink system. These boxes acquire
amounts of ink during the different purging
and flushing operations. The number of
times a machine purges and flushes for
cleaning varies depending on different
situations. For example, frequently
powering the machine on and off will
cause numerous cleaning cycles since the
machine automatically cleans upon power
up. The use of non-Brother ink may cause
frequent cleanings because non-Brother
ink could cause poor print quality which is
resolved by cleaning. The more cleaning
the machine requires, the faster these
boxes will fill up.
Repairs resulting from the use of non-
Brother supplies may not be covered
under the stated product warranty.
The ink absorber box or flushing box must
be replaced. Contact Brother customer
service or your local Brother Authorised
Service Centre to have your machine
serviced.
Reasons for cleaning are:
1. The machine automatically cleans
itself after you remove the power cord
and plug it back in.
2. After a paper jam has been cleared,
the machine automatically cleans itself
before the next received page is
printed.
3. The machine automatically cleans
itself after sitting idle for more than 30
days (infrequent use).
4. The machine automatically cleans
itself after ink cartridges of the same
colour have been replaced 12 times.
Ink Low One or more of the ink cartridges are near
the end of their lives. If the sending
machine has the ability to convert it, the
colour fax will be printed at your machine
as a monochrome fax. Order a new ink cartridge. You can
continue printing until the Touchscreen
displays
Replace Ink
.
See Related Information : Replace the Ink
Cartridges .
• You can still scan even if the ink is
low or needs to be replaced.
Install Ink An ink cartridge is not installed correctly. Remove the new ink cartridge and re-
install it slowly and firmly until it locks into
place.
See
Related Information : Replace the Ink
Cartridges .
Jam Front/Rear The paper is jammed in the machine. Remove the jammed paper.
607