manualshive.com logo in svg

Brother MFC-9180, Owner'S Manual

Share
Download
Brother MFC-9180 Owner'S Manual Download Page 125

MAINTENANCE

  Troubleshooting and Maintenance   

117

18

Troubleshooting and Maintenance

Error Messages

You may occasionally encounter a difficulty with the machine or telephone line. If this happens, the 
machine often identifies the problem and displays an error message. The list below explains the most 
common error messages, in alphabetical order.

ERROR MESSAGE

CAUSE

ACTION

CHANGE DRUM SOON The drum unit is near the end of its 

life.

If you have a print quality 
problem, replace the drum unit 
with a new one.

CHANGE TONER

If the display shows CHANGE 
TONER, you can still print. But the 
toner is depleted and the machine is 
telling you that the toner will soon 
run out.

Order a new toner cartridge now.

CHECK DOCUMENT Documents were not inserted or fed 

properly or document was too long.

Do not pull paper out until you see 
Document Jams and Paper Jams, 
page 119.

CHECK DRUM UNIT Drum unit is not installed.

Reinstall the drum unit.

CHECK PAPER

The machine is out of paper or paper 
is not properly loaded in the Multi-
purpose Sheet Feeder.

Refill the paper or remove the 
paper and load it again and then 
press 

Fax Start

.

CHECK PAPER SIZE Paper Size is improper for fax 

receiving.

Load A4 paper in multi-purpose 
sheet feeder, and then press 

Fax Start

.

COMM.ERROR

A poor quality phone line caused 
communications error.

Try the call again.

CONNECTION FAIL You tried to poll a fax machine that is 

not in Polled Waiting mode.

Verify the other party’s polling 
setup.

COOLING DOWN 
WAIT FOR A WHILE

The temperature of the drum unit or 
toner cartridge is too hot. The 
machine will pause its current print 
job and go into cooling down mode. 
During the cooling down mode, you 
will hear the cooling fan running 
while the display on the machine 
shows COOLING DOWN and 
WAIT FOR A WHILE.

You must wait and allow the 
machine to resume printing when 
it is ready.

COVER OPEN
PLS CLOSE COVER

The top cover was not completely 
closed.

Open, then close the cover.

DISCONNECTED

The other party or other party’s fax 
machine terminated the call.

Try to re-transmit or call the other 
party to see what happened.

DOC. COVER OPEN The document cover is open.

Remove any paper from the ADF 
and close the document cover.

Summary of Contents for MFC-9180




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands