Brother MFC-9050, Service Manual

Page: 85 / 200

IV - 41
(4) Remove the screw and take off the NCU PCB from the NCU bracket.
(* Provided on the European, Australian, Indonesian, and Asian versions.)
n n
Reassembling Notes
• When setting the NCU PCB to the NCU bracket, fit its edges onto "b" and "c" and into "a" and
"d" as illustrated above.
• European, Australian, Indonesian, and Asian versions: First bind the NCU harness and NCU
harness 2 together with the ferrite core NF-80 so that the NF-80 comes near to the binder on
the NCU harness 2 as shown above, and connect those harnesses to the main PCB. Then
hook them to the two latches and route them between the two bosses as illustrated on the
previous page.
Other versions: Hook the NCU harness to the two latches and route it between the two bosses
as illustrated on the previous page.