Brother MFC-9050 Service Manual Download Page 100

Page: 100 / 200

- 7

3.3

ADF Performance Test

Function

The equipment counts the documents fed by the automatic document feeder (ADF) and displays
the count on the LCD for checking the ADF performance.

Operating Procedure

(1) Set documents. (Allowable up to the ADF capacity.)

The "DOC. READY" will appear on the LCD.

(2) Press the

and

keys in this order.

While counting the documents, the equipment feeds them in and out, displaying the current
count on the LCD as shown below.

Current count (1st page in this example)

(3) After showing the final count, the equipment beeps for one second. To return the equipment

to the initial stage of the maintenance mode, press the

Stop

key.

Summary of Contents for MFC-9050









































































































































































































Search results

Summary of Contents for MFC-9050

Reviews:

Related manuals for MFC-9050

Brands by name

Popular brands

Brother MFC-9050, Service Manual

Search results

Summary of Contents for MFC-9050

Reviews:

Related manuals for MFC-9050

Brands by name

Popular brands