manualshive.com logo in svg

Brother MFC 8890DW - B/W Laser - All-in-One, User Manual

Share
Download
Brother MFC 8890DW - B/W Laser - All-in-One User Manual Download Page 129

Safety and legal

113

A

WARNING

 

For protection against the risk of electrical shock, always disconnect all cables from the wall 
outlet before servicing, modifying or installing the equipment.

 

Federal Communications Commission (FCC) Declaration of Conformity (USA only)

declares, that the products

Product Name: MFC-8480DN, MFC-8680DN and MFC-8890DW

comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the interference by one or more of the following 
measures:

„

Reorient or relocate the receiving antenna.

„

Increase the separation between the equipment and receiver.

„

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.

„

Call the dealer or an experienced radio/TV technician for help.

„

This transmitter must not be co-located or operated in conjunction with any other antenna or 
transmitter.

Responsible Party:

Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911 USA
TEL: (908) 704-1700

Summary of Contents for MFC 8890DW - B/W Laser - All-in-One

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands