Brother MFC-760, Owner'S Manual

Page: 43 / 159

34
C H A P T E R F O U R
Alternating Displays
The LCD sometimes alternates between the currently selected option,
and a help message giving brief instructions about how to proceed. The
display you’ll probably see most often is shown below, showing you that
when you place a document in the feeder, you can either dial a number to
send it as a fax or press the
Mono Copy
or
Colour Copy
key to make
a copy of the document.
FAX: NO. & START
SCAN READY
COPY: PRESS COPY
SCAN READY
Function Selection Table
If you have a basic understanding of how to program your MFC, you can
perform most of the programming settings without the Owner’s Manual.
To help you understand the function selections, options, and settings that
are available, use the Function Selection Table below.
1. INITIAL SETUP
Function Description Factory Set Chapter
1. TONE/PULSE Selects the dialling mode. TONE 5
2. DATE/TIME Enter date and time for LCD 01/01 2000 00:00 5
display and to print on
transmissions.
3. STATION ID Program the name and fax -- 5
number to appear on each
transmitted page.
4. BEEPER Adjust the volume level of the LOW 5
beeps when you press a key, an
error occurs or a document is
sent or received.
5. SPEAKER VOLUME Adjust speaker volume. LOW 5
6. RING VOLUME Adjust volume of ringer. LOW 5
7. PBX Turn on if PABX (Private OFF 5
Automatic Branch Exchange) is
connected to your MFC.
8. CLOCK CHANGE Adjust the MFC’s clock by -- 5
one hour for summer/winter
time.
1. Fax Functions