![Brother Laser MFC-4800 Service Manual Download Page 119](http://html.mh-extra.com/html/brother/laser-mfc-4800/laser-mfc-4800_service-manual_53754119.webp)
6-8
Definition of Error Codes on the Communications List
(1) Calling
Code 1
Code 2
Causes
10
08
Wrong number called.
10
20
Retrieval file error.
10
21
Image data entry error.
11
01
No dial tone detected before start of dialing.
11
02
Busy tone detected before dialing.
11
03
2nd dial tone not detected.
11
05
No loop current detected.*
11
06
Busy tone detected after dialing or called.
11
07
No response from the remote station in sending.
11
10
No tone detected after dialing.
17
07
No response from the calling station in receiving.
1A
01
Calling impossible due to memory full.
*Available in German versions only.
(2) Command reception
Code 1
Code 2
Causes
20
01
Unable to detect a flag field.
20
02
Carrier was OFF for 200 ms or longer.
20
03
Abort detected ("1" in succession for 7 bits or more).
20
04
Overrun detected.
20
05
A frame for 3 seconds or more received.
20
06
CRC error in answerback.
20
07
Undefined command received.
20
08
Invalid command received.
20
09
Command ignored once for document setting or for dumping-out
at turn-around transmission.
20
0A
T5 timeout error
20
0B
CRP received.
Summary of Contents for Laser MFC-4800
