manualshive.com logo in svg

Brother Intelli FAX-2820, Service Manual

Share
Download
Brother Intelli FAX-2820 Service Manual Download Page 148

 6-2 

Confidential

 

[ 9 ]  Setting the serial number 

(1)  Double-click the brmainte.EXE file 

(maintenance utility) stored in the PC. 

(2)  Select Input Information from Menu. 

Select the applicable model name. 

(See step2 of the left illustration) 

(3)  Check the port (USB) which the 

machine is connected through and click 

“Serial No.”.  

(See step3 of the left illustration) 

(4)  Enter the serial number (the last nine 

digits) of the machine and click the 

OK

 

button. (See step4 of the left illustration) 

(Refer to the NOTE below for the serial 

number label) 

(5)  The serial number is shown in the 

window, and check if it is correct. The 

setting of the serial number is 

completed. 

NOTE:  

Please refer to the illustration below for the identification and the location of the 

serial number label. 

SER.NO. 

MADE IN CHINA

>PS<

FOR HOME OR OFFICE USE

With FCC Standerds

Tested To Comply

Connectors:USOC RJ11C

REN(US):0.6B

FCC Registration. No. US:B3QFA06B8X5A13

Complies With Part 68, FCC Rules HAC

pursuant to Laser Notice No.50, dated July 26,2001.

standards for laser products except for deviations

This product complies with FDA performance

Rong Gang, Shenzhen, China.

Gold garden Industry, Nan Ling Village,Buji,

BROTHER BUJI NAN LING FACTORY

BROTHER CORP.(ASIA)LTD.

MANUFACTURED :

UL

LISTED

C

I.T.E.

1T22

MODEL

MFC-7220

SER. NO.

110V-120V 50/60HZ 8.8A

BROTHER INDUSTRIES, LTD.

J

 

 

Step (3) 

Step (3) 

Step

 (4

) 

Step (2) 

Serial number label

 

Enter the last 9 digits shown on the label

Serial number label 

Summary of Contents for Intelli FAX-2820


































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands