Brother Innov-ís 4000DLTD, User Manual

Page: 41 / 251

UPPER THREADING
30
c
Pass the thread through the needle bar
thread guides on the needle bar, then
thread the needle on the left side.
a
Needle bar thread guides
d
Pull up the supplemental spool pin and set it
in the up position.
a
Supplemental spool pin
e
Place the additional spool of thread on the
supplemental spool pin, so that the thread
unwinds from the front. Then push the
spool cap onto the spool pin as far as
possible to secure the thread spool.
a Spool pin
b
Spool cap
c Thread spool
f
Hold the thread from the spool with both
hands, and place the thread in the thread
guide.
* Do not place the thread in the bobbin winding
thread guide.
a Thread guide
g
Pass the thread through the thread guide
plate, following the sequence as described
below.
h
Do not pass the thread in the needle bar
thread guides on the needle bar. Thread the
needle on the right side.
i
Press .
Note
• The “Automatic Threading” button cannot be
used. Manually thread the twin needle from
front to back. Using the “Automatic Threading”
button may result in damage to the machine.
a
a
a
b
c
a