CHAPTER IV -6
I-2
Dark
Possible cause
Step
Check
Result
Remedy
HV.GND
contacts
(Fig.4-5)
Density dial
1
Is the density dial at the center
click position?
No
Set it to the center
click position or
reasonable position.
Corona failure
(soiled wire)
2
Is the corona wire dirty?
Yes
Clean the corona wire
by using the wire
cleaner.
j
Corona failure
(contact failure)
3
Are the corona electrodes
between the printer body and
drum unit dirty?
No
Clean both electrodes.
h
Drum unit failure
4
Is the problem solved when the
drum unit is replaced?
Yes
Replace the drum unit
with a new one.
H.V. power
supply PCB
5
Are there any disconnected
connectors?
No
Replace the H.V.
power supply.
Main PCB
6
Are there any disconnected
connectors?
No
Replace the main
PCB.
Driver PCB
7
Are there any disconnected
connectors?
No
Replace the driver
PCB.
Summary of Contents for HL HL-1060
