Brother HL-5440D User Manual Download Page 77

Page: 77 / 168

Control panel

LEDs (Light Emitting Diodes)

This section refers to six LEDs and two keys on the control panel.

The LED indications shown in the table below are used in the illustrations in this chapter.

General Information

Back Cover

LED

The

Back Cover

LED indicates when the errors occur in the

back of the machine or the duplex tray.

Toner

LED

The

Toner

LED indicates that the Toner is low.

Drum

LED

The

Drum

LED indicates that the Drum will need to be

replaced soon.

Paper

LED

The

Paper

LED indicates when the machine has errors

relating to paper feeding.

Error

LED

The

Error

LED indicates that the machine is in error state.

Also, the

Error

LED indicates the kind of error in

combination with other LEDs.

Ready

LED

The

Ready

LED will blink depending on the machine status.

Cancel

Key

1 Job Cancel / All Jobs Cancel

Key

Error recovery / Form feed / Reprint

LED is off.

or or

LED is on.

LED is dimmed.

LED is blinking.

Summary of Contents for HL-5440D









































































































































































Search results

Summary of Contents for HL-5440D

Reviews:

Related manuals for HL-5440D

Brands by name

Popular brands

Brother HL-5440D, User Manual

Search results

Summary of Contents for HL-5440D

Reviews:

Related manuals for HL-5440D

Brands by name

Popular brands