Brother HL-4000CN, Service Manual

Page: 166 / 345

IV-34
2.2.27 OHP sensor ASSY
1) Remove the E-ring that secures the gear REGI metal to the chute ASSY REGI, and
remove the gear REGI metal.
2) Remove the E-ring that secures the gear REGI rubber to the chute ASSY REGI, and
remove the gear REGI rubber.
3) Pull out the bush earth that secures the shaft of the roll REGI rubber.
Note:
In the following steps, take care not to lose the spring REGI: R and spring REGI: L as
they will spring.
4) Remove the spring REGI: L from the right side of chute ASSY REGI using a mini
screwdriver. Remove the spring REGI: R from the left side of the chute ASSY
REGI.
Fig.4-54
5) From the left side of chute ASSY REGI, remove the screw that secures the bracket
ASSY.
6) Remove the bush metal L (black).
Fig.4-55
Spring REGI: L
Chute ASSY REGI
Spring REGI: L
Gear REGI metal
Gear REGI rubber
Bush earth
Chute ASSY REGI
Bush metal: L
Bracket