Brother HL-3170CDW User Manual Download Page 116

Page: 116 / 205

Routine Maintenance

110

Replacing the toner cartridges

Model Name: For the model name of toner cartridges, see

The Standard toner cartridge can print approximately 2,500 pages (black) or approximately 1,400 pages
(cyan, magenta, yellow)

. The High Yield toner cartridge can print approximately 2,200 pages (cyan,

magenta, yellow)

. Actual page count will vary depending on your average type of document. When a toner

cartridge is running low, the LCD shows

Toner Low

The toner cartridge that comes supplied with the machine will need to be replaced after approximately 1,000
pages

Approx. cartridge yield is declared in accordance with ISO/IEC 19798.

NOTE

• The indication of remaining toner life will vary depending on the types of documents printed and customer's

usage.

• It is a good idea to keep a new toner cartridge ready for use when you see the Toner Low warning.
• To ensure high quality printing, we recommend that you use only Brother Original toner cartridges. When

you want to buy toner cartridges, please call Brother customer service or your local Brother dealer.

• We recommend that you clean the machine when you replace the toner cartridge. See

Cleaning and

Checking the machine

on page 140.

• DO NOT unpack the new toner cartridge until you are ready to install it.

Toner Low: X

Toner Low: X

If the LCD shows

Toner Low: X

, the machine has nearly run out of toner. Buy a new toner cartridge and

have it ready before you get a Replace Toner message.

shows the toner colour that is near the end of its

life. (

=Black,

=Cyan,

=Magenta,

=Yellow). To replace the toner cartridge, see

Replacing the toner

cartridges

on page 111.

Buy a new toner cartridge and have it ready before you get a

Replace Toner

message.

Replace Toner

When the following message appears on the LCD, you must replace the toner cartridge:

Replace Toner

The scrolling message on the LCD indicates which colour you must replace.
When the LCD shows

Replace Toner

the machine will stop printing until you replace the toner cartridge.

A new Brother Original toner cartridge will reset the Replace Toner mode.

Summary of Contents for HL-3170CDW














































































































































































































Search results

Summary of Contents for HL-3170CDW

Reviews:

Related manuals for HL-3170CDW

Brands by name

Popular brands

Brother HL-3170CDW, User Manual

Search results

Summary of Contents for HL-3170CDW

Reviews:

Related manuals for HL-3170CDW

Brands by name

Popular brands