manualshive.com logo in svg

Brother HL-2400C Series, Service Manual

Share
Download
Brother HL-2400C Series Service Manual Download Page 430

USER’S GUIDE

4–36

■

 Save

When you select “SAVE” and  you press the 

Set

 button, you can enter

the following sub-setting menus to save the macros and fonts in the
installed card:

Display Message

Save Menu

SAVE DATA

Save data that the printer will receive and
set its ID.

SAVE MACRO

Save a macro. This menu appears only in
the HP PCL5C emulation mode.

PRIMARY FONT

Save the primary font selected with the

Font

 button. This menu appears only in the

HP PCL5C emulation mode.

SECONDARY FONT

Save the secondary font selected with the

Font

 button. This menu appears only in the

HP PCL5C emulation mode.

DOWNLOAD FONT

Save a download font. This menu appears
only in the HP PCL5C emulation mode.

✒

  Note

If the capacity of the card becomes low while macros and fonts are being
saved, the display shows the “CARD FULL” error message and they
cannot be saved. Use a new card or delete unnecessary macros and fonts
from the card. The CARD LIST displays the contents and the used
capacity.

• Save Data

You can send data and save it on the card. In this mode, any kind of data
such as PCL data, BR-Script 2 data, and command strings can be saved.
When you select “SAVE DATA” and you press the 

Set

 button, the

display shows the guide menu.
The guide menu message prompts you to press the 

Set

 button again so

that the printer exits from the data reception status when you have
finished sending data.

Send the data from your computer and then press the 

Set

 button.

Summary of Contents for HL-2400C Series



















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands