manualshive.com logo in svg

Brother HL-2400C Series, Service Manual

Share
Download
Brother HL-2400C Series Service Manual Download Page 18

I-2

  Automatic Interface Selection

The printer can automatically select the bi-directional parallel, RS-
232C serial, or MIO interface depending on the interface port through
which it receives data. With this feature, the printer can be connected
to more than one computer.

  Five Emulation Modes

The printer can emulate Hewlett-Packard Color PCL

®

 5C (PCL6

®

 in

monochrome mode) and PostScript

®

 Level 2 language emulation

(Brother BR-Script Level 2) printers, the industry-standard HP-GL™
plotter as well as EPSON

®

 FX-850™, and IBM

®

 Proprinter XL

®

 printers

(in monochrome mode). It is possible to print with all application
programs that support one of these printers.

  Automatic Emulation Selection

The printer can automatically select the printer emulation mode
depending on the print commands it receives from the computer
software. With this feature, many users can share the printer on a
network.

  Data Compression Technology

The printer can internally compress the received graphics and font
data in its memory so that it can print larger graphics and more fonts
without additional memory.

  Various Fonts

The printer has 75 scalable fonts and 12 bitmapped fonts The fonts
that can be used vary according to the current emulation mode.

  CCITT G3/G4

Since the printer supports the CCITT G3/G4 format in addition to HP-
compatible formats, it can quickly receive and print data compressed
in this format.

  Lock Panel

If the panel button settings have been changed, the printer may not
work as expected. It is possible for the administrator of the printer to
lock the settings to prevent changes from being made.

  Power Save Mode

The printer has a power saving mode. As laser printers consume
power to keep the fixing assembly at a high temperature, this feature
can save electricity when the printer is on but not being used. The
factory setting of the Power Save mode is ON so that it complies with
the EPA Energy Star new specification. Compared with conventional
laser printers, this printer consumes less power even when the power
saving mode is turned off.

  Toner Save Mode

The printer has an economical toner save mode. This mode allows
you to reduce the printer running cost substantially in addition to the
improved life expectancy of the toner cartridge.

  Reprint Function

A touch of a panel button allows reprinting of the last print job without
sending the data again from the computer. When there is not enough
memory to print the last complete job out, the last print page can be
reprinted.

Summary of Contents for HL-2400C Series



















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands