Brother HL-2035 User Manual Download Page 8

Page: 8 / 93

What is in the box?

When you unpack the printer, check that you have all of the following parts.

Note

The AC power cord may be slightly different than the one in the illustration above, depending on which
country you bought the printer in.

Interface cable

The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the
interface you intend to use (USB, Parallel or Network).

USB cable
Do not use a USB interface cable that is longer than 6 feet (2.0 meters).

Do not connect the USB cable to a non-powered hub or a Mac

keyboard.

When you use a USB cable, make sure you connect it to the USB connector of your PC.

USB is not supported under Windows

95 or Windows NT

4.0.

About this printer

Printer

Quick Setup Guide

CD-ROM

Drum unit and toner

cartridge assembly

AC power cord

Summary of Contents for HL-2035






























































































Search results

Summary of Contents for HL-2035

Reviews:

Related manuals for HL-2035

Brands by name

Popular brands

Brother HL-2035, User Manual

Search results

Summary of Contents for HL-2035

Reviews:

Related manuals for HL-2035

Brands by name

Popular brands