Brother HL-2035 User Manual Download Page 57

Page: 57 / 93

Routine maintenance

CAUTION

We recommend that you place the drum unit and toner cartridge assembly on a piece of disposable paper

or cloth in case you accidentally spill or scatter toner.

To prevent damage to the printer from static electricity, do not touch the electrodes shown in the illustrations.

Push down the blue lock lever and take the toner cartridge out of the drum unit.

CAUTION

Handle the toner cartridge carefully. If toner scatters on your hands or clothes, immediately wipe or wash it

off with cold water.

Note

• Be sure to seal up the drum unit tightly in a bag so that toner powder does not spill out of the unit.
• Discard the used drum unit according to local regulations, keeping it separate from domestic waste. If you

have questions, call your local waste disposal office.

Summary of Contents for HL-2035






























































































Search results

Summary of Contents for HL-2035

Reviews:

Related manuals for HL-2035

Brands by name

Popular brands

Brother HL-2035, User Manual

Search results

Summary of Contents for HL-2035

Reviews:

Related manuals for HL-2035

Brands by name

Popular brands