Brother HE-8000, Instruction Manual

Page: 61 / 100

HE-8000
5. OPERATION
54
The program numbers for patterns which have been created using the BAS-PC/300 range from P1 to P9.
However, program numbers which have not yet been assigned to a program will not appear on the program
number LED.
→ → → → 1 → → → → 2 → → → → 3 → → → → ….. → → → → 90 → → → → P1 → → → → P2 → → → → …… → → → → P9 → → → → 1 → → → → 2 → → → → ……
You can check and change the following parameters for patterns which have been created using the BAS-
PC/300.
No. Setting items Setting range Unit Default
00 Sewing speed (zigzag part) 1,000 - 4,000 rpm 100 3,600
02 Length of knife
Value is for checking purposes and
cannot be changed.
- -
08 Knife X position alignment -0.5 - 0.5 mm 0.1 0.0
09 Knife Y position alignment -0.8 - 0.8 mm 0.1 0.0
16 Running speed (Straight bar tack) 1,000 - 3,000 rpm 100 2,000
48 Underlay speed 1,000 - 3,000 rpm 100 2,000
60 Slow speed 500 - 1,500 rpm 100 800
61 Rear tack speed 500 - 4,000 rpm 100 4,000
62 Front tack speed 500 - 4,000 rpm 100 4,000