HE-8000
5. OPERATION
45
Example 2:
This example shows how to set a
taper tack for the front tack pattern and
an eyelet for the rear tack pattern.
1. Press the SELECT key (13) to change the mode
to automatic, test feed or manual mode. Use the
program No. keys (7) and (8) to select the program
number for the program to use (example: program
No. 10), and then press the ENTER key (17).
2. Press the SELECT key (13) to change the mode
to program mode.
3. Use the program No. keys (7) and (8) to select
the number for the parameter to be changed.
(Example: Button hole/bar tack setting -
Parameter No. 01).
4. Use the parameter keys (15) and (16) to change
the setting for the selected parameter (Example:
Buttonhole (free) setting value - 0), and then
press the ENTER key (17).
5. Use the program No. keys (7) and (8) to select
the next parameter number. (Example: Front tack
pattern - Parameter No. 20).
6. Use the parameter keys (15) and (16) to change
the setting for the selected parameter (example:
Taper tack pattern setting value - 4), and then
press the ENTER key (17).
7. Repeat steps 5 and 6 to set parameter No. 30.
(Example: Rear tack pattern - Parameter No. 30)
(Example: Eyelet pattern setting value - 3)
8. Press the SELECT key (13) to change the mode
to automatic mode.
* An eyelet taper-tack buttonhole has now been
set for program No. 10.
* The setting details can be saved in the
program notes of the program memos for easy
checking.
(7)
(8)
(13)
(17)
2118Q
(7)
(8)
2114Q
(15)
(16)
(17)
2119Q
(15)
(16)
(17)
(8)
(7)
2120Q
(13)
2121Q
