12
Waste ink tank
Insert the waste ink tube into the main body. Fasten the waste
ink tank to the table leg or the like by using two pieces of string,
etc. Insert the waste ink tube into the waste ink tank.
IMPORTANT
If the tip of the waste ink tube is immersed in the
liquid, it will prevent the smooth flow of the
waste ink, to disable the ink suction operation of
the head cleaning function. After the waste ink
tank is fastened, the waste ink tube should be
cut so that the length from the tube connection
is 150 mm. The waste ink tube should be cut
diagonally.
Avoid placing the waste ink tube horizontally as
much as possible, and be sure not to let it bend.
Otherwise the waste ink may have difficulty
flowing through the tube.
TIPS
The table provides a place where to install the
waste ink tank. Install the waste ink tank there.
Mount the following supplied accessories inside the printer.
Open the cover to the direction
a
and shift the carriage to
direction
s
. Put on the gloves that came with the printer and
perform the following work.
Flushing receiver
X0348
①
②
X0363
X0362
150 mm
Summary of Contents for GTX pro Bulk
Page 9: ...viii 8 9 10 11 China only ...
