manualshive.com logo in svg

Brother FAX-8350P, Owner'S Manual

Share
Download
Brother FAX-8350P Owner'S Manual Download Page 165

155

T R O U B L E S H O O T I N G   A N D   M A I N T E N A N C E

WARNING

Handle the toner cartridge carefully. If toner scatters on your hands or
clothes, immediately wipe it off or wash it with cold water.

3

Unpack the new toner cartridge. Place the used toner cartridge into
the aluminium bag and discard it according to local regulations.

WARNING

■

Wait to unpack the toner cartridge until immediately before you
install it into the machine. If a toner cartridge is left unpacked for a
long period of time, the toner life is shortened.

■

You should use only a genuine Brother toner cartridge (TN-6300/
TN-6600 series), which is specially formulated to ensure top print
quality. Using another brand of toner cartridge may void your
machine’s warranty.

4

Gently rock the toner cartridge from side to side five or six times.

5

Remove the protective cover.

Summary of Contents for FAX-8350P





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands