manualshive.com logo in svg

Brother FAX-2950, Basic User'S Manual

Share
Download
Brother FAX-2950 Basic User'S Manual Download Page 106

98

Scanning difficulties (For FAX-2950, MFC-7240 and MFC-7290) 

Difficulties

Suggestions

TWAIN or WIA errors appear when 
starting to scan. (Windows

®

).

Make sure the Brother TWAIN or WIA driver is chosen as the primary source in 
your scanning application. For example, in Nuance

™

 PaperPort

™

 12SE, click 

Scan Settings

, 

Scan or Get Photo

 and click 

Select

 to choose the Brother 

TWAIN or WIA driver.

TWAIN or ICA errors appear when 
starting to scan. (Macintosh)

Make sure the Brother TWAIN driver is chosen as the primary source. In 
PageManager, click 

File

, 

Select Source

 and choose the Brother TWAIN driver.

Mac OS X 10.6.x and 10.7.x users can also scan documents using the ICA 
Scanner Driver.

See Software User’s Guide: 

Scanning a document using the ICA driver (Mac OS 

X 10.6.x - 10.7.x)

.

OCR does not work.

Try increasing the scanning resolution.

(Macintosh users) 

Make sure you have downloaded and installed Presto! PageManager from 
http://nj.newsoft.com.tw/download/brother/PM9SEInstaller_BR_multilang.dmg

Software difficulties (For FAX-2950, MFC-7240 and MFC-7290) 

Difficulties

Suggestions

Cannot install software or print.

(Windows

®

 only)

 

Run the 

Repair MFL-Pro Suite

 program on the CD-ROM. This program will repair 

and reinstall the software.

Cannot perform ‘2 in 1’ or ‘4 in 1’ 
printing.

Check that the paper size setting in the application and in the printer driver are the 
same.

The machine does not print from 
Adobe

®

 Illustrator

®

.

Try to reduce the print resolution. (See Software User’s Guide: 

Basic tab

.)

Paper handling difficulties 

Difficulties

Suggestions

The machine does not feed paper.

The LCD shows 

No Paper

 or a 

Paper Jam message.

If there is no paper, load a new stack of paper into the paper tray.

If there is paper in the paper tray, make sure it is straight. If the paper is curled, 
you should straighten it. Sometimes it is helpful to remove the paper, turn the 
stack over and put it back into the paper tray.

Reduce the amount of paper in the paper tray, and then try again.

(For FAX-2950, MFC-7240 and MFC-7290)

Make sure that manual feed mode is not chosen in the printer driver.

Clean the paper pick-up roller. See 

Routine maintenance

 

uu

 page 54.

If the LCD shows the Paper Jam message and you still have a problem, see 

Error and maintenance messages

 

uu

 page 78.

Documents do not feed or 
document are skewed.

Clean the document feed rollers. See 

Cleaning the document feed

 

uu

 page 67.

What paper can I use?

You can use thin paper, plain paper, bond paper, recycled paper, envelopes and 
labels that are made for laser machines. (For details, see 

Acceptable paper and 

other print media

 

uu

 page 17.) 

You can load envelopes from the manual feed slot.

Summary of Contents for FAX-2950

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands