Brother FAX-2950, Basic User'S Manual

Page: 108 / 144

100
Setting Dial Tone detection
B
When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial as
soon as it detects a dial tone. This setting can
save a small amount of time when sending a
fax to many different numbers. If you change
the setting and start having problems with
dialling you should change back to the default
No Detection setting.
a
Press Menu , 0 , 5 .
Press Menu , 0 , 4 (for New Zealand).
b
Press
a
or
b
to choose
Detection
or
No Detection
.
Press OK .
c
Press Stop/Exit .
Telephone line interference/

VoIP
B
If you are having difficulty sending or
receiving a fax due to possible interference
on the telephone line, we recommend that
you adjust the equalization for compatibility to
reduce the modem speed for fax operations.
a
Press Menu , 2 , 0 , 1 .
b
Press
a
or
b
to choose
Basic(for
VoIP)
,
Normal
or
High
(FAX-2840,
FAX-2950 and MFC-7290).

Basic(for VoIP)
cuts the modem
speed to 9600 bps. When you
change the Compatibility to
Basic(for VoIP)
, the ECM
feature is only available for fax
sending.
For a standard telephone line: If you
regularly experience interference on
your standard telephone line try this
setting.
If you are using VoIP: VoIP service
providers offer fax support using
various standards. If you regularly
experience fax transmission errors
try this setting.

Normal
sets the modem speed at
14400 bps.

High
sets the modem speed at
33600 bps (FAX-2840, FAX-2950
and MFC-7290).
Press OK .
c
Press Stop/Exit .
Note
VoIP (Voice over IP) is a type of phone
system that uses an Internet connection,
rather than a traditional phone line.