Brother FAX-2480C User Manual Download

Page: 101 / 143

Transferring your faxes or Fax
Journal report

If the LCD shows:

Change Unable XX

Clean Unable XX

Init. Unable XX

Print Unable XX

Scan Unable XX

, we recommend

transferring your faxes to another fax
machine. (See

Transferring faxes to another

fax machine

on page 92.)

You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See

Transferring Fax Journal report

to another fax machine

on page 92.)

Note

If there is an error message on the
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.

Transferring faxes to another fax
machine

If you have not set up your Station ID (See

Quick Setup Guide

.), you cannot enter fax

transfer mode.

Press

Menu

Do one of the following:

If the LCD shows

No Data

, there are

no faxes left in the machine's
memory.
Press

Stop/Exit

If the LCD shows

Enter Fax No.

enter the fax number to which faxes
will be forwarded.

Press

Mono Start

Transferring Fax Journal report to
another fax machine

If you have not set up your Station ID, you
cannot enter fax transfer mode.

Press

Menu

Enter the fax number to which Fax
Journal report will be forwarded.

Press

Mono Start

Document jam

Documents can jam if they are not inserted or
fed properly, or if they are too long. Follow the
steps below to clear a document jam.

Document is jammed in the top of the
ADF unit

Take out any paper from the ADF that is
not jammed.

Open the ADF cover.

Pull the jammed document up and to the
left.

Close the ADF cover.

Press

Stop/Exit

Note

To avoid document jams, close the ADF
cover properly by pressing it down in the
center.

Summary of Contents for FAX-2480C
















































































































































Search results

Summary of Contents for FAX-2480C

Reviews:

Related manuals for FAX-2480C

Brands by name

Popular brands

Brother FAX-2480C, User Manual

Search results

Summary of Contents for FAX-2480C

Reviews:

Related manuals for FAX-2480C

Brands by name

Popular brands