manualshive.com logo in svg

Brother DCP-L2531DW, Online User'S Manual, Page: 469 / 658

Share
Download
Brother DCP-L2531DW Online User'S Manual Download Page 469

Error Message

Cause

Action

The drum unit or the toner cartridge
and drum unit assembly is not
installed correctly.

Put the toner cartridge in the drum
unit. Then reinstall the toner cartridge
and drum unit assembly in the
machine.

Drum End Soon

The drum unit is near the end of its
life.

Order a new drum unit before you get
the 

Replace Drum

 message.

FaxAbility On

(For New Zealand)

The machine is set to Faxability
mode. You can not change the
Receive Mode from Manual to
another mode.

Set FaxAbility to 

Off

.

Jam 2-sided

The paper is jammed in the 2-sided
paper tray.

Pull the paper tray and the 2-sided
tray out completely, open the back
cover and then remove all jammed
paper. Close the back cover, and put
the paper tray and the 2-sided tray
firmly back in the machine.

Jam Inside

The paper is jammed inside the
machine.

Open the front cover and remove the
toner cartridge and drum unit
assembly. Pull out the jammed paper.
Close the front cover.

Jam Rear

The paper is jammed in the back of
the machine.

Open the fuser cover and remove all
jammed paper. Close the fuser cover.
If the error message remains, press

Retry

.

Jam Tray

The paper is jammed in the indicated
paper tray.

Pull the paper tray out completely and
remove all jammed paper. Put the
paper tray firmly back in the machine.

Limit Exceeded

The print limit set in Secure Function
Lock 3.0 was reached.

Call your administrator to check your
Secure Function Lock Settings.

Manual Feed

Manual

 was selected as the paper

source in the printer driver, but there
is no paper in the manual feed slot.

Place paper in the manual feed slot.

No Caller ID

There is no incoming call history. You
did not receive calls or you have not
subscribed to the Caller ID service
from your telephone company.

If you want to use the Caller ID
feature, call your telephone company.

No Paper

The machine is out of paper, or paper
is not loaded correctly in the paper
tray.

•

Refill paper in the paper tray.
Make sure the paper guides are
set to the correct size.

•

If paper is in the tray, remove it
and load it again. Make sure the
paper guides are set to the correct
size.

•

Do not overfill the paper tray.

No Response/Busy

The number you dialed does not
answer or is busy.

Verify the number and try again.

462

Summary of Contents for DCP-L2531DW



















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments