42
No Paper Fed
The machine is out of paper or paper
is not correctly loaded in the paper
tray.
Do one of the following:
Refill the paper in the paper tray,
and then press
Mono Start
or
Colour Start
.
Remove and reload the paper,
then press
Mono Start
or
Colour Start
. (See
The paper tray was not fully inserted. Remove the paper tray and re-install
it until it locks into place, and then
press
Mono Start
or
Colour Start
on
the control panel.
Paper dust has accumulated on the
surface of the paper pick-up rollers.
Clean the paper pick-up rollers.
(See Advanced User’s Guide:
Cleaning the paper pick-up rollers
.)
The Jam Clear Cover is not closed
correctly.
Make sure the Jam Clear Cover is
closed evenly at both ends. (See
The paper is jammed in the machine. Remove the jammed paper by
following the steps in
If this error occurs often during
2-sided printing, the paper feed
rollers may be stained with ink. Clean
the paper feed rollers.
(See Advanced User’s Guide:
Cleaning the paper feed rollers
.)
Out of Memory
The machine's memory is full.
If a copy operation is in process:
Press
Stop/Exit
and wait until the
other operations that are in
process finish, and then try again.
Press
Mono Start
or
Colour Start
to print the pages
scanned so far.
Error Message
Cause
Action