manualshive.com logo in svg

Brother BES-1260BC, Instruction Manual

Share
Download
Brother BES-1260BC Instruction Manual Download Page 183

Chapter 8  Creating Production Report

BES-960BC 

•

 BES-1260BC

188

Displaying Report

Displays the machine operation status in the form of report.

■

The following reports can be displayed:

Details

Displays detail data while the machine is in operation.

Thread Breakage

Displays the thread breakage information for each machine.

information on Needle Bar

Thread Breakage

Displays the thread breakage information for each pattern.

information in Pattern

Output information

Displays production output or efficiency of the selected machine.

Total output information

Displays production output or efficiency of multiple machines.

■

Items to be displayed in each report can be set.  For details, refer to "Setting

Display Items" (

→

 page 195).

1.

Select the desired report from View menu or on the tool bar.

2.

Select [Open] from File menu or click 

 .

3.

Select the applicable machine.

4.

Click [OK].

5.

Specify the period to read.

For more information, refer to "General" in "Setting Display Items" on page 195.

6.

Click [OK].

The report appears.

Click here to select the
machine for total output
information.  Click here
again to cancel the
selection.

Click here to select the
machine for detail data,
thread breakage and
output information.

Summary of Contents for BES-1260BC













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands