manualshive.com logo in svg

Brother BES-1260BC, Instruction Manual

Share
Download
Brother BES-1260BC Instruction Manual Download Page 171

Chapter 7  Operation of Machine

BES-960BC 

•

 BES-1260BC

176

1. Operating Procedures

1-1 Power Source

   • Turn the power on to the machine.

   • The power lamp lights up and the display

window indicates "BES-", and then "960".

   • An alarm buzzer sounds three times.  Then

the needle bar and presser foot move up
and the frame moves up to the reference
point.
The machine enters the waiting state for an
embroidering data selection.

Note) When turning the power off and back it on

again, wait for at least 10 seconds.

1-2 Preparation for Embroidering

   • Select embroidering data while the machine is in the waiting state for an embroidering data

selection, and transmit required data by pressing the 

 icon.

   • The READY lamp lights up and the machine is placed in the waiting state.

   • Using the jog switches (

udlr

), determine a position to start embroidering.

Note) An error code is displayed in the display window if a pattern comes out of the hoop.

   • Pressing the START switch starts embroidering.

START

   * During embroidering, the speed is indicated in the display window.

   • After embroidering is finished, the hoop returns to the start point and the machine is placed

in the stand-by state.

Summary of Contents for BES-1260BC













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands