Brother BES-1260BC Instruction Manual Download Page 134

Page: 134 / 236

BES-960BC

•

BES-1260BC

139

Chapter 6 Embroidering

Arrange Icons

Minimized windows that are scattered can be aligned.

■

This command is available for minimized windows.

Select [Arrange Icons] from Window menu.

The minimized windows are aligned.

Changing window size

Several square buttons with figures are displayed at the right end of the title

bar. These buttons are used to change the window size.

If this button is clicked when running an ordinary software, it is displayed

on the task bar in the minimized size as a button.

If this button is clicked, the window size changes to a medium size.

If this button is clicked, the window changes to the full size of the

desktop.

This button is used to end the software or to close the folder. This

button cannot be clicked when the machine window is displayed.

Summary of Contents for BES-1260BC













































































































































































































































Search results

Summary of Contents for BES-1260BC

Reviews:

Brands by name

Popular brands

Brother BES-1260BC, Instruction Manual

Search results

Summary of Contents for BES-1260BC

Reviews:

Brands by name

Popular brands