Chapter 6 Operation of Machine
BES-116AC
112
Emergency stop switch
1. Operating Procedures
1-1 Power Source
1.
Turn the power on to the machine.
2.
When the machine is equipped with the
shut-off switch unit, Reset the emergency
stop button.
3.
When the machine is equipped with the
shut-off switch unit, Press the power
switch.
4.
A message is displayed on the LCD.
• The alarm sounds three times and the
needle bar and the presser foot move
upward. Then the hoop moves to the zero
point and the sewing data screen is
displayed.
Note) When turning the power off and back it on
again, wait for at least 10 seconds.
1-2 Preparation for Embroidering
• Select embroidering data.
• Using the jog switches (
), determine a position to start embroidering.
Note) An error message is displayed on the LCD if a pattern comes out of the hoop.
• Pressing
starts embroidering.
• After embroidering is finished, the machine is placed in the stand-by state.
Power switch
Summary of Contents for BES-116
