Brother BES-116, Instruction Manual

Page: 72 / 153

BES-116AC
70
Chapter 4 Editing of Embroidering Data
Other Editing
Setting of other functions related to editing is available.
The following types of setting is available.
0 stitch deletion For deleting stitches at the same point without
stepping forward or back.
This function is previously set to (for not deleting
0stitch)upon shipment.
For deleting 0 stitch
For not deleting 0 stitch
Thread trimming feed number For setting the number of feeds for thread trimming
This function is previously set to (ECS data)
or (Except ECS data)upon shipment.
~ For thread trimming at the number of feeds
indicated on the icon
For not thread trimming by feeding
Swing width correction For setting the needle swing width correction amount
The correction amount can be set in increments of 0.1mm.
The setting range is -0.5 ~ 2.0mm in both the X and
Y directions. (The setting range is displayed as "-5
~ 20" on the screen.)
This function is previously set to 0(no swing width
correction)upon shipment.
1. Read sewing data.
2. Press three times.
0 Stitch Deletion
3. Select this function by pressing .
4. Press
E N D
after setting is finished.
Press when setting continuously.