Brother 885-V35 Operation Manual Download Page 169

Page: 169 / 192

Editing and Saving Patterns

167

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Press .

The selected pattern is turned off, and it
returns to the initial embroidery screen.

Turn off the sewing machine.

Note

Always detach the embroidery unit when
you move the sewing machine.

Turn on the sewing machine, and then select
the pattern.

Memo

If you have changed the embroidery size
and/or layout before turning off the machine,
make the same setting changes again before
restarting embroidering. For details, refer to
"Adjusting the layout and the size" (page
161).

Press

Press .

Press

(Forward one color) to move to

the beginning of the color you want to
embroider.

Press

(Forward one stitch) to increase

the needle count.

is pressed continuously, it moves

forward 1 —> 9 —>30 stitches.

Move forward to about 10 stitches before the
total number of stitches confirmed in

Restart the embroidery.

Summary of Contents for 885-V35

































































































































































































Search results

Summary of Contents for 885-V35

Reviews:

Related manuals for 885-V35

Brands by name

Popular brands

Brother 885-V35, Operation Manual

Search results

Summary of Contents for 885-V35

Reviews:

Related manuals for 885-V35

Brands by name

Popular brands