Brother 885-V35, Operation Manual

Page: 134 / 192

132
UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Entering the pattern data
Follow the pattern drawn on the grid sheet and
program the pattern into the sewing machine.
a
Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 43).
b
Press (Utility stitch key) on the
operation panel, and select .
c
Check the grid sheet set, and specify the
coordinates of the first point.
Specify the coordinates using , and
then press .
d
Specify whether single stitching or triple
stitching will be sewn between the points.
is single stitching, and gives
triple stitching.
e
Specify the coordinates of the second point,
and then press
.
f
Repeat steps
d
through
e
to specify each point.
• If you make a mistake entering a point, press
, and the previous point is erased.
Memo
z
If you want to edit the pattern, press .
You can insert, delete and move points if
you have entered at least two points.
For details, refer to "Editing the pattern data"
(page 133).
g
After all points have been entered, press .
X
The embroidery screen appears.
h
Specify the various stitching settings, such as
reverse/reinforcement stitching, in the same
way as with other stitches.
• To revise the pattern, press .
Memo
z
The pattern you entered can be saved for
later use. For details, refer to "Saving
patterns" (page 129).