Brother 882-D10 Operation Manual Download Page 53

Page: 53 / 208

USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE

ettin
g R

Basic operations

B-51

Using USB Media

USB port for mouse/media (USB 2.0)

USB media

Connecting the Machine to the
Computer

Using the included USB cable, the sewing machine
can be connected to your computer.

USB port for computer

USB cable connector

USING FUNCTIONS BY CONNECTING THE
ACCESSORY TO THE MACHINE

Memo

• USB media is widely used, however some

USB media may not be usable with this
machine. Please visit our website for more
details.

• Depending on the type of USB media being

used, either directly plug the USB device
into the machine’s USB port or plug the
USB media Reader/Writer into the
machine’s USB port.

Note

• The connectors on the USB cable can only

be inserted into a port in one direction. If it
is difficult to insert the connector, do not
insert it with force. Check the orientation of
the connector.

• For details on the position of the USB port

on the computer (or USB hub), refer to the
instruction manual for the corresponding
equipment.

Summary of Contents for 882-D10

















































































































































































































Search results

Summary of Contents for 882-D10

Reviews:

Related manuals for 882-D10

Brands by name

Popular brands

Brother 882-D10, Operation Manual

Search results

Summary of Contents for 882-D10

Reviews:

Related manuals for 882-D10

Brands by name

Popular brands