M E S S A G E C E N T E R
9 - 8
Remote Retrieval
Using Remote Access Code
1
Dial your fax number from a touch tone phone.
2
When your FAX/MFC answers, immediately enter your Remote Retrieval Access
Code.
3
The FAX/MFC signals the kinds of messages received:
1 long beep—Fax message(s)
2 long beeps—Voice message(s)
3 long beeps—Fax and Voice message(s)
No beeps—No messages
4
The FAX/MFC then prompts you with two short beeps to enter a command. If you
wait longer than 30 seconds to enter a command, the MFC hangs up. If you enter an
invalid command, the FAX/MFC beeps three times.
5
Press
9 0
to reset the FAX/MFC when you finish.
6
Hang up.
Changing Remote Retrieval Access Code
Enter your Remote Retrieval Access Code when the FAX/MFC picks up your call, so
you can access features remotely. The access code is preset to 159
, but you can
change it.
1
Press
Function/Set
,
8
,
7
.
2
Enter a three-digit number from 000 to 999 and press
Function/Set
. The “
” cannot
be changed.
3
Press
Stop
to exit.
If your FAX/MFC is set to MANUAL mode, you can access the Message Center by
waiting about 2 minutes, then entering the Remote Access Code within 30 seconds.
Do not use the same digits that appear in your Fax Receive Code or Telephone
Answer Code.
Summary of Contents for 580MC
Page 1: ...FAX 580MC MFC 660MC OWNER S MANUAL ...
Page 112: ...I 4 I N D E X ...
