Brother 515, Owner'S Manual

Page: 118 / 120

108
Enter Paging press 3 .
Program Fax Forward Number
press
4
. Enter the new number of
the remote fax machine where
you want your fax messages
forwarded and then press
# # .
Press
9 6 1
after two short beeps,
then enter the number of remote
fax machine, and then
# # to
retrieve Memory Status List.
Retrieve a Fax
Press
9 6
then to Print a Memory Status List press
1 , then enter the number of
remote fax machine, and then
# #
.
After the beep, hang up and wait.
Retrieve all faxes press 2 , then
enter the number of remote fax
machine, and then
# #
. After the
beep, hang up and wait.
Erase all fax messages press 3 .
Changing Remote Access Code
1 Press Menu , 8 , 7 .
2 Enter a three-digit number from 000 to
900. The cannot be changed.
3 Press
Set
.
4 Press Stop to exit.
Remote Commands
Listen to Voice Messages
Press 9 1
then to Repeat a message press
1
.
Skip to next message press
2
.
Stop playing the message press 9 .
Record a Memo
Press 9 2 .
Wait for the beep, then speak.
then to Stop recording — Press
9
.
4 2 3
Erase All Messages
Press
9 3
. If you hear three beeps, all
messages have not yet been heard, and the
messages will not be erased.
Play/Record Outgoing Message
Press 9 4
then to Play TAD MSG press 1 1 .
Play F/T MSG press 1 2 .
Play PAGING MSG press
1 3
.
Record new TAD MSG press
2 1
,
then speak after beep. Press
9
to
stop.
Record new F/T MSG press
2 2
,
then speak after beep. Press
9
to
stop.
Record new PAGING MSG press
2 3 , then speak after beep. Press
9
to stop.
Change Paging/Fax Forwarding Setting
Press 9 5
then to Turn feature off press
1
.
Enter Fax Forwarding press
2
.